EarthQuake CS4518B Betreibershandbuch PDF herunterladen (Seite 15)

Page 15

Fuel

The engines are lubricated by Viper Engine Oil specially formulated

for air-cooled 2-cycle gasoline engine use. If oil is not available, use

an antioxidant added quality oil expressly labeled for air-cooled

2-cycle chain saw engine use.

RECOMMENDED MIXING RATIO

GASOLINE 50 : OIL 1

These engines are certiﬁed to operate on unleaded gasoline.

See chart for mixing.

GAS OIL RATIO

1 gallon 2.6 ounces 50:1

2.5 gallons 6.4 ounces 50:1

WARNING

The fuel is highly ﬂammable. Do not smoke or bring any ﬂame or

sparks near fuel.

IMPORTANT

1. DO NOT USE FUEL WITH NO OIL(RAW GASOLINE) –

It will cause severe damage to the engine inner parts

very quickly and void warranty.

2. DO NOT USE OIL FOR 4-CYCLE ENGINE USE or WATER COOLED

2-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port

blocking, or piston ring sticking and void warranty.

HOW TO MIX FUEL

1. Measure out the quantities of gasoline and oil to be mixed.

2. Put some of the gasoline into a clean, approved fuel container.

3. Pour in all of the oil and agitate well.

Fuel and Chain Oil

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

Keine Kommentare

EarthQuake CS4518B Betreibershandbuch Seite 15